EAN kod8595568924636
Tarifni broj39259020
Težina1,33 kg/m
Bojawhite
MaterijalPVC
Materijal bez uljayes
Samogasivi30 s
Otpornost na temperaturu-5 - 60 °C
Probna petlja850 °C
Način montaže
Quick lid instalation is done by pressing it in the middle.
Mehanička zaštitaIK07
Otpornost na udar1 J
Širina110 mm
Visina67,5 mm
Dužina2 m
Unutarnje područje5500 mm2
Tolerancija
The trunkings are available in lengths with a tolerance of ± 0.5% at 20 ° C.
Upotreba
they are resistant to aggressive and chemical environments. They do not resist UV radiation, they are not suitable for outdoor use.
Preporuka proizvođača
If the SK 40X33 (higher) shielding canal can be installed, it is not possible to use instruments with a larger installation depth, eg with an overvoltage protection device. The producer recommends checking the depth of a particular device before installation. For the installation of devices with very rounded corners, KOPOS recommends the use of the KP PK instrument box and drilling a hole in the lid using a VPT 64 drill.
Područje s opasnošću od eksplozije
Electro-installation trunking (insertive, rectangular, halogen-free) and parapet canals with accesories can be installed in zones with explosion hazard of flammable gases (zone 2) and with the risk of explosion of flammable dusts (zone 22), installation must comply with EN 60079-14.
Klasa reakcije na požarA1 - F
Vrste zaštiteIP 40
StandardiČSN EN 50 085-1
Opis paketapackage - cardboard
Sa zaštitnom folijomyes

Designed for inserting power and communication circuits, security lines and other lines. Individual lines can be electromagnetically shielded by inserting a shielding canal, which is fixed to the trunking by clamps PSK 1. For classical instruments that are installed in a closed instrument box KP 80 PK clicked in the body of the canal or into an open instrument box KP PK installed in the bottom of the parapet trunkings. With using KOPOBOX MINI P, modular devices can be installed. There is no need to use any covers for the final installation of instrument. The lid is cut to the desired length and inserted next to the instrument.